Find your used machine in a few clicks

Arburg 920 H 5000-4600 m.Peripherie

The machine is offered as a complete production system, equipped with specially developed Tecnomatic IT automation for cutlery production, which can also be adapted for other applications. The extensive Piovan peripherals include a G35 hot-air dryer, PF30 vacuum receiver and three THW118-F temperature controllers, one of which is still unused. Additionally, an ImanPack Micropack PRO flow-pack system is integrated.

Explore Machine

Engel V 330H/80V/130 Combi Reinraum

ENGEL V 330H/80V/130 Combi for cleanroom and two-component applications This hydraulic two-component injection moulding machine, built in 2006, provides 1,300 kN clamping force and two injection units with 25 and 22 mm screws. It comes from pharmaceutical cleanroom production and has 33,107 operating hours. The cell is equipped with a CC 200 control in German and English, a rotary table, GEKU SR 500 ST linear robot, horizontal conveyor and complete safety enclosure. This provides a practical combination for automated cleanroom and multi-component processes. The machine has been inspected and is available. It is located in Hanover, Germany. Inspection and technical consultation are possible by appointment.

Explore Machine

Krauss Maffei KM 230 - 1400 AX

The Krauss Maffei KM 230-1400 AX represents state-of-the-art injection molding technology from 2015. With an impressive clamping force of 2300 kN and an injection pressure of 2387 bar, it is excellently suited for the production of large-volume and technically demanding components. The machine features a powerful 30.6 kW motor and a heating capacity of 22.7 kW. With an injection volume of 570 cm³ and a maximum shot weight of 519 g, it enables efficient production of larger molded parts. The generous mounting plates of 880 x 830 mm and tie bar spacing of 610 x 560 mm provide ample space for complex tools.

Explore Machine

Arburg 720 S 3200-2100

ARBURG 720 S 3200-2100 for large-volume injection moulding applications This hydraulic injection moulding machine, built in 2005, provides 3,200 kN clamping force, 720 x 720 mm tie-bar spacing and a 70 mm screw. With 1,078 cm³ shot volume and 984 g PS shot weight, it is configured for larger moulded parts and demanding series applications. The equipment includes two core pulls and a robot interface. According to the available information, the motor, pump, screw and barrel were renewed or replaced and the injection unit was resealed. Complete documentation and software are available. The machine has been inspected and is available. It is located in Hanover, Germany. Inspection and technical consultation are possible by appointment.

Explore Machine

Engel VC 500/120 spex.

ENGEL VC 500/120 Spex. – used tie-bar-less injection moulding machine This used ENGEL VC 500/120 Spex. was built in 2010 and is equipped with CC 200 control and a tie-bar-less clamping unit. The machine offers 1,200 kN clamping force, a 40 mm screw and an injection volume of 251 cm³. Equipment includes one core pull, four hot-runner circuits, a conveyor-belt interface and an ejector-plate safety device. Please verify suitability for the actual mould, material and process during inspection.

Explore Machine

Krauss Maffei KM 65-160 C2

KraussMaffei KM 65-160 C2 with MC4 control This hydraulic injection moulding machine, built in 2005, provides 800 kN clamping force, 405 x 405 mm tie-bar spacing and a 25 mm screw. For the 25 mm configuration, 53 cm³ shot volume and 47 g PS shot weight are specified; an additional 18 mm barrel is also available. The equipment includes a handling interface, one core pull and an interface for colouring units. The machine comes from German production and, according to the available information, was regularly maintained by manufacturer technicians. The machine has been inspected and is available. It is located in Hanover, Germany. Inspection and technical consultation are possible by appointment.

Explore Machine

Wanner C17.26 SV Kunststoffmühle

Explore Machine

Wanner C13.20sv

Explore Machine

ZPS MCFV 1060 NT CNC-Vertikal-Bearbeitungszentrum

Explore Machine

Arburg 520S 1600 290/70

ARBURG 520 S 1600-290/70 configured as a 2K cell with Multilift H This hydraulic two-component injection moulding machine, built in 2009, combines 1,600 kN clamping force with a horizontal 25 mm and a vertical 18 mm injection unit. The Selogica control supports clear operation of the machine and connected peripheral equipment. The equipment includes a Multilift H with 6 kg payload, three core pulls, two blow-off functions, twelve integrated hot-runner zones and interfaces for temperature-control units and a dryer. Documented maintenance and the stated resealing and repair work complement the extensive production equipment. The machine has been inspected and is available. It is located in Hanover, Germany. Inspection and technical consultation are possible by appointment.

Explore Machine

DEMAG Ergotech 160 - 430 Extra

The DEMAG Ergotech Extra 160–430, manufactured in 2005, is a hydraulic injection moulding machine with a clamping force of 1,600 kN. Technical documentation and a historical service record are available for machine number 78961073. The photographs from 2022 show a Demag handling robot; the associated records specify DR721-209 and robot number 75190431. A conveyor belt and GWK temperature control units are also documented. The current scope of supply and condition must be confirmed before an offer is issued. History according to the 2022 purchase assessment: The hoses are recorded as dating from 2019. According to this assessment, the pump was replaced in 2020. The last manufacturer inspection/repair is recorded as 2020. ABS is documented as the material previously processed. These details refer to the condition recorded at that time. Please contact me if you require further technical information or details of the current condition and availability. Open original data sheet The 40 mm column applies to this machine: 231 cm³ swept volume, 205 g shot weight (PS) and 2,020 bar injection pressure. The 35 and 45 mm columns show alternative configurations.

Explore Machine

Engel Victory 200/50 Tech mit Viper 12 Roboter

For sale is a used, tie-bar-less Engel Victory 200/50 Tech injection moulding machine built in 2011. The machine provides 500 kN clamping force and is equipped with the proven Engel CC200 control. A key advantage is the integrated Engel Viper 12 linear robot. Together with the multi-stage conveyor belt and Engel robot safety equipment, the system is suitable for automated production processes. The tie-bar-less Victory design provides excellent access to the mould area and simplifies mould changes and maintenance. Further equipment includes a double core pull on the moving platen and a 16-zone hot-runner control. The injection unit has a 30 mm screw and a maximum shot volume of 99 cm³. The machine is offered as a used machine in its present condition. Technical data is based on the information provided by the seller; errors and prior sale reserved. Further details, price and availability are available on request.

Explore Machine

Engel Victory 200/50 Tech Ecodrive

For sale is a used, tie-bar-less Engel Victory 200/50 Tech Ecodrive injection moulding machine built in 2013. The machine has 500 kN clamping force and the proven Engel CC200 control. The tie-bar-less Victory design provides excellent access to the mould area and simplifies mould changes, automation and maintenance. The Ecodrive system combines hydraulic machine technology with demand-based drive control. Equipment includes a double core pull on the moving platen, a 16-zone hot-runner control, a multi-stage conveyor belt and Engel safety equipment for robot operation. A robot is not included in this offer. The injection unit has a 30 mm screw and a maximum shot volume of 99 cm³. The machine is offered as a used machine in its present condition. Technical data is based on information provided by the seller; errors and prior sale reserved. Further details, price and availability are available on request.

Explore Machine

FANUC ROBOSHOT Alpha S220iA

The FANUC ROBOSHOT Alpha S220iA is an all-electric injection moulding machine designed for precise and energy-efficient series production. Built in 2019, the machine is described by the supplier as being in like-new condition and has only 399 operating hours. The FANUC 31i-B CNC control features a 15-inch touchscreen, SI units and password-protected operator levels. Process functions include AI pressure profile control, AI metering control, AI mould and ejector protection, backflow monitoring, high-precision V/P switchover, automatic mould-height adjustment, two-stage ejector control, energy-consumption measurement and automatic material purging. Further equipment includes a four-circuit flow meter, hopper slide, three-colour LED signal lamp, three independent air valves, eight digital outputs, eleven digital inputs, pre-injection/injection compression and cascade valve-gate control for up to eight valves. The Euromap 67 interface allows robot integration; no robot is included. The user manual and warning labels are in Hungarian. Price on request.

Explore Machine

FANUC ROBOSHOT Alpha S100iA

The FANUC ROBOSHOT Alpha S100iA is an all-electric injection moulding machine designed for high-precision and energy-efficient series production. Built in 2019, the machine is described by the supplier as being in like-new condition and has only 400 operating hours. The FANUC 31i-B CNC control with 15-inch touchscreen includes AI pressure-profile control, AI metering control, AI mould and ejector protection, backflow monitoring, high-precision V/P switchover, automatic mould-height adjustment, two-stage ejector control, energy-consumption measurement and automatic material purging. Further equipment includes a four-circuit flow meter, hopper slide, three-colour LED signal lamp, three independent air valves, eight digital outputs, eleven digital inputs, pre-injection/injection compression and cascade valve-gate control for up to eight valves. The Euromap 67 interface enables robot integration; no robot is included. A standard tool kit, Hungarian user manual and Hungarian warning labels are included. Price on request.

Explore Machine

Sumitomo (SHI) DEMAG Systec 210-580-840 Servo

The Sumitomo (SHI) DEMAG Systec 210-580-840 Servo is a robust hydraulic injection moulding machine designed for demanding series production. Built in 2015, the machine is described by the supplier as being in excellent condition. With 2,100 kN clamping force, a 45 mm screw and 358 cm³ shot volume, it is suitable for a broad range of technical plastic components. The NC3 control provides clear and reliable process operation. Equipment includes twelve integrated hot-runner circuits, 28 electrical temperature-control valves, two cascade controls, a connection to the central drying system and three temperature-control units rated up to 160 °C. The ABB take-out robot shown in the images is not included in the base offer and can be purchased separately as an option. Tie-bar spacing is 580 × 580 mm and mould height ranges from 340 to 690 mm. Price and further information are available on request.

Explore Machine

Wittmann Battenfeld HM 180/350H/210S (2015) mit Drehtisch

Used Wittmann Battenfeld HM 180 with rotary table This 2015 Wittmann Battenfeld HM 180/350H/210S is configured as a flexible multi-component injection moulding solution. Two injection units, 1,800 kN clamping force and an integrated rotary table support the efficient production of demanding two-component and insert-moulded parts. The machine features the proven UNILOG B6P control and a Wittmann linear robot. Its 570 × 520 mm tie-bar spacing and extensive mould, hydraulic and pneumatic interfaces support versatile production use. Inspection is available by appointment. Further technical information, price and availability are available on request.

Explore Machine

Engel Victory 330H/200V/80 Combi (2016)

Used Engel Victory Combi The 2016 Engel Victory 330H/200V/80 Combi is a tie-bar-less multi-component injection moulding machine for demanding two-component applications. Two hydraulic injection units and the freely accessible clamping unit support flexible mould concepts and straightforward automation integration. With 800 kN clamping force and several possible screw diameters, the machine can be adapted to a wide range of components and materials. Engel's tie-bar-less Victory design simplifies mould changes and provides generous mould-space access. Inspection is available by appointment. Further technical information, price and availability are available on request.

Explore Machine

ENGEL e-motion 440H/440H/160 T combi (2016)

Used electric ENGEL e-motion 2K injection moulding machine The 2016 ENGEL e-motion 440H/440H/160 T combi is a fully electric multi-component injection moulding machine for precise two-component applications. With 1,600 kN clamping force, two injection units and only 13,227 operating hours, it is well suited to demanding series production requiring high repeatability. The machine offers a generous mould area with 520 × 520 mm tie-bar spacing and a variable mould height from 250 to 600 mm. An ENGEL Viper robot can be offered as an option. Inspection is available by appointment. Further technical information, price and availability are available on request.

Explore Machine

Sumitomo (SHI) DEMAG Systec 100/420-310 NC5 (2015)

Used DEMAG Systec 100 with NC5/CDIAS control The 2015 Sumitomo (SHI) DEMAG Systec 100/420-310 is a compact hydraulic injection moulding machine with 1,000 kN clamping force. Its NC5/CDIAS control and extensive peripheral equipment support flexible and process-reliable series production. Equipment includes proportional hydraulic core pulls, pneumatic circuits, a 4-zone cooling water manifold, integrated 8-zone hot runner control, mould temperature interfaces and EUROMAP 67. Inspection is available by appointment. Further technical information, price and availability are available on request.

Explore Machine

ARBURG 470C 1500-400 Golden Edition – 54.914 h

Used ARBURG 470C Golden Edition The 2014 ARBURG 470C 1500-400 Golden Edition is a proven hydraulic injection moulding machine with 1,500 kN clamping force. Its wear-resistant 45 mm screw, two pumps and injection pressure increased by 10% up to 2,500 bar provide a solid basis for reliable series production. Equipment includes two air-blow units and a EUROMAP 67 interface for robot integration. The machine has 54,914 operating hours and is in very good condition. Inspection is available by appointment. Further technical information, price and availability are available on request.

Explore Machine

ARBURG 470C 1500-400 Golden Edition – 53.860 h

Used ARBURG 470C Golden Edition with 1,500 kN The 2014 ARBURG 470C 1500-400 Golden Edition is a reliable hydraulic injection moulding machine with 1,500 kN clamping force. With 470 × 470 mm tie-bar spacing, 650 × 650 mm platens and 750 mm maximum daylight, it accommodates a broad range of moulds. Its wear-resistant 45 mm screw provides 254 cm³ shot volume or 232 g shot weight. Equipment includes two pumps, two air-blow units and a EUROMAP 67 robot interface. The machine has 53,860 operating hours. Inspection is available by appointment. Further technical information, price and availability are available on request.

Explore Machine

Sumitomo (SHI) Demag IntElect2 100/470-250 – nur ca. 9.000 h

Only approx. 9,000 operating hours – all-electric with robot and peripherals With only approx. 9,000 operating hours, this 2021 machine offers particularly low running time. I know the previous owner personally and consider the machine to be very well maintained. The Sumitomo (SHI) Demag IntElect2 100/470-250 is a modern all-electric injection moulding machine for precise, energy-efficient plastics processing. With 1,000 kN clamping force, injection unit 250 and a 30 mm screw, it is well suited to demanding series production requiring reliable process control. The enlarged 470 x 470 mm tie-bar distance and mould height of up to 550 mm provide a versatile mould space. The wear-protected plasticising unit with bimetallic barrel, 16-zone hot-runner control and integrated mould cooling support stable production processes. The scope of supply includes a Sumitomo Demag SDR 5S H&P 3-axis linear robot, two HB-Therm Thermo-5 temperature-control units and integrated conveyor equipment, including an additional Z conveyor and sprue sorter. The system also provides modern interfaces for digital connectivity, process monitoring and peripheral equipment. Inspection and testing can be arranged by appointment. Machine videos Machine overview and production Sprue sorter – detail view Mould area during production KOCH system available separately The KOCH KKT 55 material drying system with its KOCH loader is excluded from the Demag offer price. It can be purchased separately; price on request.

Explore Machine

Sumitomo (SHI) Demag Systec 60/420-200 mit Handling

Sumitomo Demag Systec 60/420-200 with handling This pre-owned Sumitomo (SHI) Demag Systec 60/420-200, built in 2011, is a compact hydraulic injection moulding machine with handling. It is aimed at plastics processors looking for a robust machine for day-to-day production. The Systec is suited to small and medium-sized moulded parts as well as series applications in technical plastics processing. The handling complements the machine as a practical production cell. The complete specification for the clamping and injection units, mould space, ejector, dimensions and machine weight is listed above under Technical Details . The gallery complements this information with machine views, the type plate and the available technical data sheets.

Explore Machine

Mikron WF 31 C/150

For sale is a used Mikron WF 31 C/150 universal toolroom milling machine, year of manufacture 1986, equipped with Heidenhain TNC 150 contouring control. The machine is offered with the documentation and accessories shown in the images. Further information available on request.

Explore Machine

FANUC ROBOSHOT Alpha-S50iA

The FANUC ROBOSHOT Alpha-S50iA is a used injection moulding machine from 2018. The available technical specification states 500/650 kN clamping force, a 27 mm injection cylinder diameter and a theoretical cylinder volume of 50 cm³. With 500 × 470 mm platens, a mould height range of 210 to 460 mm and a maximum opening stroke of 600 mm, the machine is a compact option for suitable injection moulding applications. The machine is offered in its current condition. Technical details and scope of supply are subject to confirmation before contract conclusion. Inspection and further information are available on request.

Explore Machine

Arburg 270 C 400-70 (2007)

Used ARBURG 270 C 400-70 with Selogica control The ARBURG 270 C 400-70, built in 2007, is a compact hydraulic injection moulding machine with 400 kN clamping force. A tie-bar spacing of 270 × 270 mm, 446 × 446 mm platens and a maximum platen distance of 550 mm make it suitable for smaller technical plastic parts and precise series production. The installed 18 mm screw provides an injection volume of 23 cm³ and a shot weight of 21 g at up to 2,500 bar injection pressure. Equipment includes a robot interface, sorting gate, CF drive and complete documentation and software on CF card. According to the seller, a new optional 25 mm injection unit with HVF, RSP, nozzle and adapter can be offered. According to the seller, the machine comes from ongoing production and first German ownership, is fully functional, tested and available in Hannover, Germany. Inspection and verification of the exact scope are possible by appointment.

Explore Machine

Engel insert 200H/70 Vertikal (2011)

Used ENGEL insert 200H/70 vertical machine with rotary table The ENGEL insert 200H/70, built in 2011, is a vertical injection moulding machine with 700 kN clamping force and a two-station rotary table measuring 1,200 mm in diameter. This design is especially suitable for insert-moulding and automated multi-station processes. The 30 mm screw provides an injection volume of 99 cm³ and a shot weight of 89 g. Equipment includes an EUROMAP 67 handling interface, EUROMAP 63 for machine data acquisition, programmable inputs and outputs, a light curtain and hot-runner / shut-off nozzle control. The machine comes from first German ownership and has a complete maintenance history. It has been tested and is available in Hannover, Germany. Inspection and verification of the exact scope are possible by appointment.

Explore Machine

Engel VC 750/220 Spex (2014)

Used tie-bar-less Engel VC 750/220 Spex The Engel VC 750/220 Spex, built in 2014, is a tie-bar-less hydraulic injection moulding machine with 2,200 kN clamping force. The unobstructed mould area facilitates mould changes and provides good accessibility for larger or complex moulds. The 55 mm screw provides an injection volume of 475 cm³ and a shot weight of 430 g. The machine is equipped with CC200 control, core-pull control, 880 × 830 mm platens and a maximum platen distance of 1,050 mm. The machine comes from first ownership, has been tested and is available in Hannover, Germany. Inspection and verification of the exact scope are possible by appointment.

Explore Machine

Engel Victory 200/80 Tech CC200 – SN 163769

Used Engel Victory 200/80 Tech – serial number 163769 The Engel Victory 200/80 Tech, built in 2006, is a tie-bar-less hydraulic injection moulding machine with 800 kN clamping force. The unobstructed mould area and enlarged platens provide good accessibility and flexibility during mould changes. The 25 mm screw provides an injection volume of 69 cm³ and a shot weight of 64 g PS. Equipment includes a quality sorting gate with PD protocol and graphics, four freely programmable inputs and outputs, an EUROMAP 12 handling interface and an Engel EMS host-computer interface. The machine is equipped with a new pump, has been tested and is available in Hannover, Germany. It is offered without a material hopper and conveying unit. Inspection and verification of the exact scope are possible by appointment.

Explore Machine

KraussMaffei KM 130-750-130 CXV BluePower 2K – 2014

Used KraussMaffei KM 130 CXV two-component machine The KraussMaffei KM 130-750-130 CXV, built in 2014, is configured as a two-component injection moulding machine with two injection units. It provides 1,300 kN clamping force, MC6 control and a BluePower energy optimisation package. The two injection units use 50 mm and 30 mm screws and provide injection volumes of 393 + 85 cm³ and shot weights of 357 + 77 g. Equipment includes hydraulic and pneumatic core pulls, blow-off functions, needle shut-off A+C and water manifolds on the nozzle and ejector sides. The machine has been tested and is available in Hannover, Germany. Inspection and verification of the exact scope are possible by appointment.

Explore Machine

KraussMaffei EX 80-380 vollelektrisch (2009)

Used all-electric KraussMaffei EX 80-380 The KraussMaffei EX 80-380, built in 2009, is an all-electric injection moulding machine with 800 kN clamping force and only 35,808 operating hours. The all-electric drive supports precise, repeatable movements and energy-efficient production. The 40 mm screw provides an injection volume of 201 cm³ and a shot weight of 183 g. Extensive equipment includes two hydraulic core pulls with auxiliary unit, injection-compression moulding, EUROMAP 67 robot interface, eight hot-runner control zones, BluePower package and graphic/process analysis functions. The machine comes from first German ownership, has been tested and is available in Hannover, Germany. Inspection and verification of the exact scope are possible by appointment.

Explore Machine

KraussMaffei KM 120-380 EX mit LR 100-2300 (2008)

KraussMaffei KM 120-380 EX from clean-room production This all-electric injection moulding machine, built in 2008, comes from clean-room and pharmaceutical production. With 1,200 kN clamping force, MC5 control and a 35 mm screw, it is suitable for precision plastics-processing applications. The equipment includes a KraussMaffei LR 100-2300 linear robot, roller conveyor and complete safety enclosure. Maintenance and acceptance history as well as the latest certified inspection report are available. The machine is offered without a material hopper. The machine has been inspected and is available. It is located in Hanover, Germany. Inspection and technical consultation are possible by appointment.

Explore Machine

KraussMaffei KM 250-1000 CX (2009)

KraussMaffei KM 250-1000 CX with extensive process equipment This hydraulic injection moulding machine, built in 2009, provides 2,500 kN clamping force, a 50 mm screw and 393 g shot weight. Its MC5 control supports clear machine operation and process control. The equipment includes two core pulls on the moving and fixed platen, accumulator technology, active back-pressure control, PV control, twelve temperature-control zones and comprehensive functions for process monitoring and cycle-data analysis. A pneumatic blow-off valve and additional production-oriented control functions are also included. The machine has been inspected and is available. It is located in Hanover, Germany. Inspection and technical consultation are possible by appointment.

Explore Machine

KOCH KKT 55 Materialtrockner mit Fördergerät – 2022

KOCH KKT 55 material dryer with loader This used drying system from Werner Koch Maschinentechnik GmbH consists of a KOCH KKT 55 material dryer and a KOCH material loader. The dryer nameplate confirms a manufacturing date of 11/2022 and electrical ratings of 400 V / 3.5 kW. Mobile peripheral equipment for plastics processing The system has a mobile design and digital touchscreen control. The drying hopper includes an inspection opening. Material drying and conveying are provided as a combined unit. Suitability for your polymer and required throughput should be checked for the specific application. Condition and scope of supply The documented scope includes the KKT 55 dryer and the pictured KOCH material loader. According to the seller on 28 October 2026, the system is very well maintained, technically sound and fully functional, with minor signs of use. Price and current availability on request. I will be pleased to help you with questions about this used plastics processing equipment and its scope of supply.

Explore Machine

Arburg 570 S 2000-800 mit Multilift – 2014

Arburg 570 S 2000-800 with Multilift Select Very well cared for, with particular attention to the hydraulic system. According to the previous owner, a separate oil filtration system operated around the clock to protect the proportional and directional control valves from contamination and failures. This careful approach supports machine availability and long-term value retention. Machine with documented purchase assessment The completed assessment documents the available information on the machine’s technical specification, equipment and condition. A redacted German copy is available as a separate PDF download. Download machine assessment (PDF, redacted, German, 3 pages) I offer this used Arburg Allrounder 570 S 2000-800, manufactured in 2014. This hydraulic injection moulding machine combines 2,000 kN clamping force with an 800 injection unit and a 45 mm screw. The machine includes a transverse Multilift Select with 15 kg payload and the pictured safety enclosure. Equipment includes twelve hot-runner zones, two core pulls and interfaces for a temperature controller and dryer. The seller confirms a variable-speed pump. Documented machine condition Specifications are based on the completed seller form, machine photographs and the email dated 4 November 2026. The seller reports 60,720 operating hours and 54,616 automatic operating hours. The older control photograph dated 15 October 2026 shows lower readings. According to the seller, the machine was demonstrated at operating temperature. No wear measurements for the screw, non-return valve or barrel are available. Technical documentation is reported as available. Dryers, temperature controllers and additional peripheral equipment are not confirmed as included. Please contact me for further details or to arrange an inspection. Price, availability, delivery and payment terms will be clarified individually.

Explore Machine

Arburg 570 S 2200-800 mit Multilift – 2015

Machine with documented purchase assessment The redacted purchase assessment records the seller-completed machine checklist covering technical data, condition, maintenance and equipment. Download purchase assessment (PDF, redacted, 3 pages) Arburg 570 S 2200-800 with Multilift Select I offer this used 2015 Arburg Allrounder 570 S with 2,200 kN clamping force, a 50 mm screw and Selogica control. The package includes a transverse Multilift Select with 15 kg payload and the pictured safety enclosure. The handling X axis travels in synchronization with the ejector for precisely coordinated part removal. Twelve hot-runner zones, two core pulls and two air-blast functions complete the equipment. Condition and documentation The seller confirms regular maintenance, most recently carried out internally in September 2026. No known defects or outstanding repairs are entered in the seller form. These are seller statements; photographs and the purchase assessment document the machine. Availability according to seller form: early 2027. Please contact me for price, inspection arrangements and delivery and payment terms.

Explore Machine

ENGEL VC 1350/300 Spex mit Viper 12 (2009)

Used ENGEL injection moulding machine with Viper 12 This ENGEL VC 1350/300 Spex combines a hydraulic tie-bar-less clamping unit with a 55 mm screw and CC 200 control. Open access to the mould area and the listed Viper 12 handling system support automated plastics processing. Equipment Viper 12 robot and one hydraulic core pull Hydraulically swivelling injection unit Wear-resistant S8 screw for thermoplastics, L/D 20 HV1 hydraulic system for sequential movements Single mould nozzle control Colour dosing and ejector safety interfaces Four freely programmable digital outputs Location: Hanover, Germany. I will confirm the current operating hours and exact scope of supply on request. Price on request. Please contact me for technical questions or to discuss a viewing.

Explore Machine

KraussMaffei KM 160-750 CX (2008)

Used KraussMaffei KM 160-750 CX with MC 5 This hydraulic injection moulding machine, built in 2008, offers 1,600 kN clamping force and MC 5 control. The machine has 24,600 operating hours and is from its first owner in Germany. It was used to process PP and PC. Equipment One hydraulic core pull control Twelve temperature control zones for mould hot runners Eight-circuit water manifold EUROMAP 67 signal interface for handling equipment EUROMAP 18 mechanical interface Hydraulic screw reverse rotation lock Quality monitoring, event log and cycle time analysis Chrome-plated tie bars and machine levelling mounts Peripheral equipment shown in the photographs is excluded from the scope of supply. Location: Hanover, Germany. I will confirm the exact scope of supply and availability on request. Price on request. Please contact me for technical questions or to discuss a viewing.

Explore Machine